Getting Started
- 1. Introduction
- 2. Quick Start - Standalone HBase

Getting Started

1. Introduction

Quickstart will get you up and running on a single-node, standalone instance of HBase.

2. Quick Start - Standalone HBase

This section describes the setup of a single-node standalone HBase. A standalone instance has all HBase daemons — the Master, RegionServers, and ZooKeeper — running in a single JVM persisting to the local filesystem. It is our most basic deploy profile. We will show you how to create a table in HBase using the hbase shell CLI, insert rows into the table, perform put and scan operations against the table, enable or disable the table, and start and stop HBase.

Apart from downloading HBase, this procedure should take less than 10 minutes.

2.1. JDK Version Requirements

HBase requires that a JDK be installed. See Java for information about supported JDK versions.

2.2. Get Started with HBase

Procedure: Download, Configure, and Start HBase in Standalone Mode

Choose a download site from this list of Apache Download Mirrors. Click on the suggested top link. This will take you to a mirror of HBase Releases. Click on the folder named stable and then download the binary file that ends in .tar.gz to your local filesystem. Do not download the file ending in src.tar.gz for now.
Extract the downloaded file, and change to the newly-created directory.
```
$ tar xzvf hbase-3.0.0-SNAPSHOT-bin.tar.gz
$ cd hbase-3.0.0-SNAPSHOT/
```
You are required to set the JAVA_HOME environment variable before starting HBase. You can set the variable via your operating system’s usual mechanism, but HBase provides a central mechanism, conf/hbase-env.sh. Edit this file, uncomment the line starting with JAVA_HOME, and set it to the appropriate location for your operating system. The JAVA_HOME variable should be set to a directory which contains the executable file bin/java. Most modern Linux operating systems provide a mechanism, such as /usr/bin/alternatives on RHEL or CentOS, for transparently switching between versions of executables such as Java. In this case, you can set JAVA_HOME to the directory containing the symbolic link to bin/java, which is usually /usr.
```
JAVA_HOME=/usr
```
Edit conf/hbase-site.xml, which is the main HBase configuration file. At this time, you need to specify the directory on the local filesystem where HBase and ZooKeeper write data and acknowledge some risks. By default, a new directory is created under /tmp. Many servers are configured to delete the contents of /tmp upon reboot, so you should store the data elsewhere. The following configuration will store HBase’s data in the hbase directory, in the home directory of the user called testuser. Paste the <property> tags beneath the <configuration> tags, which should be empty in a new HBase install.

Example 1. Example hbase-site.xml for Standalone HBase
```
<configuration>
  <property>
    <name>hbase.rootdir</name>
    <value>file:///home/testuser/hbase</value>
  </property>
  <property>
    <name>hbase.zookeeper.property.dataDir</name>
    <value>/home/testuser/zookeeper</value>
  </property>
  <property>
    <name>hbase.unsafe.stream.capability.enforce</name>
    <value>false</value>
    <description>
      Controls whether HBase will check for stream capabilities (hflush/hsync).
      Disable this if you intend to run on LocalFileSystem, denoted by a rootdir
      with the 'file://' scheme, but be mindful of the NOTE below.
      WARNING: Setting this to false blinds you to potential data loss and
      inconsistent system state in the event of process and/or node failures. If
      HBase is complaining of an inability to use hsync or hflush it's most
      likely not a false positive.
    </description>
  </property>
</configuration>
```
You do not need to create the HBase data directory. HBase will do this for you. If you create the directory, HBase will attempt to do a migration, which is not what you want.

The hbase.rootdir in the above example points to a directory in the local filesystem. The ‘file://‘ prefix is how we denote local filesystem. You should take the WARNING present in the configuration example to heart. In standalone mode HBase makes use of the local filesystem abstraction from the Apache Hadoop project. That abstraction doesn’t provide the durability promises that HBase needs to operate safely. This is fine for local development and testing use cases where the cost of cluster failure is well contained. It is not appropriate for production deployments; eventually you will lose data.

To home HBase on an existing instance of HDFS, set the hbase.rootdir to point at a directory up on your instance: e.g. hdfs://namenode.example.org:8020/hbase. For more on this variant, see the section below on Standalone HBase over HDFS.

The bin/start-hbase.sh script is provided as a convenient way to start HBase. Issue the command, and if all goes well, a message is logged to standard output showing that HBase started successfully. You can use the jps command to verify that you have one running process called HMaster. In standalone mode HBase runs all daemons within this single JVM, i.e. the HMaster, a single HRegionServer, and the ZooKeeper daemon. Go to http://localhost:16010 to view the HBase Web UI.

Java needs to be installed and available. If you get an error indicating that Java is not installed, but it is on your system, perhaps in a non-standard location, edit the conf/hbase-env.sh file and modify the JAVA_HOME setting to point to the directory that contains bin/java on your system.

Procedure: Use HBase For the First Time

Connect to HBase.

Connect to your running instance of HBase using the hbase shell command, located in the bin/ directory of your HBase install. In this example, some usage and version information that is printed when you start HBase Shell has been omitted. The HBase Shell prompt ends with a > character.
```
$ ./bin/hbase shell
hbase(main):001:0>
```
Display HBase Shell Help Text.

Type help and press Enter, to display some basic usage information for HBase Shell, as well as several example commands. Notice that table names, rows, columns all must be enclosed in quote characters.
Create a table.

Use the create command to create a new table. You must specify the table name and the ColumnFamily name.
```
hbase(main):001:0> create 'test', 'cf'
0 row(s) in 0.4170 seconds
=> Hbase::Table - test
```

List Information About your Table

Use the list command to confirm your table exists

hbase(main):002:0> list 'test'
TABLE
test
1 row(s) in 0.0180 seconds
=> ["test"]

Now use the describe command to see details, including configuration defaults

hbase(main):003:0> describe 'test'
Table test is ENABLED
test
COLUMN FAMILIES DESCRIPTION
{NAME => 'cf', VERSIONS => '1', EVICT_BLOCKS_ON_CLOSE => 'false', NEW_VERSION_BEHAVIOR => 'false', KEEP_DELETED_CELLS => 'FALSE', CACHE_DATA_ON_WRITE =>
'false', DATA_BLOCK_ENCODING => 'NONE', TTL => 'FOREVER', MIN_VERSIONS => '0', REPLICATION_SCOPE => '0', BLOOMFILTER => 'ROW', CACHE_INDEX_ON_WRITE => 'f
alse', IN_MEMORY => 'false', CACHE_BLOOMS_ON_WRITE => 'false', PREFETCH_BLOCKS_ON_OPEN => 'false', COMPRESSION => 'NONE', BLOCKCACHE => 'true', BLOCKSIZE
 => '65536'}
1 row(s)
Took 0.9998 seconds

Put data into your table.

To put data into your table, use the put command.
```
hbase(main):003:0> put 'test', 'row1', 'cf:a', 'value1'
0 row(s) in 0.0850 seconds
hbase(main):004:0> put 'test', 'row2', 'cf:b', 'value2'
0 row(s) in 0.0110 seconds
hbase(main):005:0> put 'test', 'row3', 'cf:c', 'value3'
0 row(s) in 0.0100 seconds
```
Here, we insert three values, one at a time. The first insert is at row1, column cf:a, with a value of value1. Columns in HBase are comprised of a column family prefix, cf in this example, followed by a colon and then a column qualifier suffix, a in this case.

Scan the table for all data at once.

One of the ways to get data from HBase is to scan. Use the scan command to scan the table for data. You can limit your scan, but for now, all data is fetched.

hbase(main):006:0> scan 'test'
ROW                                      COLUMN+CELL
 row1                                    column=cf:a, timestamp=1421762485768, value=value1
 row2                                    column=cf:b, timestamp=1421762491785, value=value2
 row3                                    column=cf:c, timestamp=1421762496210, value=value3
3 row(s) in 0.0230 seconds

Get a single row of data.

To get a single row of data at a time, use the get command.

hbase(main):007:0> get 'test', 'row1'
COLUMN                                   CELL
 cf:a                                    timestamp=1421762485768, value=value1
1 row(s) in 0.0350 seconds

Disable a table.

If you want to delete a table or change its settings, as well as in some other situations, you need to disable the table first, using the disable command. You can re-enable it using the enable command.
```
hbase(main):008:0> disable 'test'
0 row(s) in 1.1820 seconds
hbase(main):009:0> enable 'test'
0 row(s) in 0.1770 seconds
```
Disable the table again if you tested the enable command above:
```
hbase(main):010:0> disable 'test'
0 row(s) in 1.1820 seconds
```

Drop the table.

To drop (delete) a table, use the drop command.

hbase(main):011:0> drop 'test'
0 row(s) in 0.1370 seconds

Exit the HBase Shell.

To exit the HBase Shell and disconnect from your cluster, use the quit command. HBase is still running in the background.

Procedure: Stop HBase

In the same way that the bin/start-hbase.sh script is provided to conveniently start all HBase daemons, the bin/stop-hbase.sh script stops them.
```
$ ./bin/stop-hbase.sh
stopping hbase....................
$
```
After issuing the command, it can take several minutes for the processes to shut down. Use the jps to be sure that the HMaster and HRegionServer processes are shut down.

The above has shown you how to start and stop a standalone instance of HBase. In the next sections we give a quick overview of other modes of hbase deploy.

2.3. Pseudo-Distributed Local Install

After working your way through quickstart standalone mode, you can re-configure HBase to run in pseudo-distributed mode. Pseudo-distributed mode means that HBase still runs completely on a single host, but each HBase daemon (HMaster, HRegionServer, and ZooKeeper) runs as a separate process: in standalone mode all daemons ran in one jvm process/instance. By default, unless you configure the hbase.rootdir property as described in quickstart, your data is still stored in /tmp/. In this walk-through, we store your data in HDFS instead, assuming you have HDFS available. You can skip the HDFS configuration to continue storing your data in the local filesystem.

Hadoop Configuratio

This procedure assumes that you have configured Hadoop and HDFS on your local system and/or a remote system, and that they are running and available. It also assumes you are using Hadoop 2. The guide on Setting up a Single Node Cluster in the Hadoop documentation is a good starting point.

Stop HBase if it is running.

If you have just finished quickstart and HBase is still running, stop it. This procedure will create a totally new directory where HBase will store its data, so any databases you created before will be lost.
Configure HBase.

Edit the hbase-site.xml configuration. First, add the following property which directs HBase to run in distributed mode, with one JVM instance per daemon.
```
<property>
  <name>hbase.cluster.distributed</name>
  <value>true</value>
</property>
```
Next, change the hbase.rootdir from the local filesystem to the address of your HDFS instance, using the hdfs://// URI syntax. In this example, HDFS is running on the localhost at port 8020. Be sure to either remove the entry for hbase.unsafe.stream.capability.enforce or set it to true.
```
<property>
  <name>hbase.rootdir</name>
  <value>hdfs://localhost:8020/hbase</value>
</property>
```
You do not need to create the directory in HDFS. HBase will do this for you. If you create the directory, HBase will attempt to do a migration, which is not what you want.
Start HBase.

Use the bin/start-hbase.sh command to start HBase. If your system is configured correctly, the jps command should show the HMaster and HRegionServer processes running.

Check the HBase directory in HDFS.

If everything worked correctly, HBase created its directory in HDFS. In the configuration above, it is stored in /hbase/ on HDFS. You can use the hadoop fs command in Hadoop’s bin/ directory to list this directory.

$ ./bin/hadoop fs -ls /hbase
Found 7 items
drwxr-xr-x   - hbase users          0 2014-06-25 18:58 /hbase/.tmp
drwxr-xr-x   - hbase users          0 2014-06-25 21:49 /hbase/WALs
drwxr-xr-x   - hbase users          0 2014-06-25 18:48 /hbase/corrupt
drwxr-xr-x   - hbase users          0 2014-06-25 18:58 /hbase/data
-rw-r--r--   3 hbase users         42 2014-06-25 18:41 /hbase/hbase.id
-rw-r--r--   3 hbase users          7 2014-06-25 18:41 /hbase/hbase.version
drwxr-xr-x   - hbase users          0 2014-06-25 21:49 /hbase/oldWALs

Create a table and populate it with data.

You can use the HBase Shell to create a table, populate it with data, scan and get values from it, using the same procedure as in shell exercises.
Start and stop a backup HBase Master (HMaster) server.

Running multiple HMaster instances on the same hardware does not make sense in a production environment, in the same way that running a pseudo-distributed cluster does not make sense for production. This step is offered for testing and learning purposes only.

The HMaster server controls the HBase cluster. You can start up to 9 backup HMaster servers, which makes 10 total HMasters, counting the primary. To start a backup HMaster, use the local-master-backup.sh. For each backup master you want to start, add a parameter representing the port offset for that master. Each HMaster uses two ports (16000 and 16010 by default). The port offset is added to these ports, so using an offset of 2, the backup HMaster would use ports 16002 and 16012. The following command starts 3 backup servers using ports 16002/16012, 16003/16013, and 16005/16015.
```
$ ./bin/local-master-backup.sh start 2 3 5
```
To kill a backup master without killing the entire cluster, you need to find its process ID (PID). The PID is stored in a file with a name like /tmp/hbase-USER-X-master.pid. The only contents of the file is the PID. You can use the kill -9 command to kill that PID. The following command will kill the master with port offset 1, but leave the cluster running:
```
$ cat /tmp/hbase-testuser-1-master.pid |xargs kill -9
```
Start and stop additional RegionServers

The HRegionServer manages the data in its StoreFiles as directed by the HMaster. Generally, one HRegionServer runs per node in the cluster. Running multiple HRegionServers on the same system can be useful for testing in pseudo-distributed mode. The local-regionservers.sh command allows you to run multiple RegionServers. It works in a similar way to the local-master-backup.sh command, in that each parameter you provide represents the port offset for an instance. Each RegionServer requires two ports, and the default ports are 16020 and 16030. Since HBase version 1.1.0, HMaster doesn’t use region server ports, this leaves 10 ports (16020 to 16029 and 16030 to 16039) to be used for RegionServers. For supporting additional RegionServers, set environment variables HBASE_RS_BASE_PORT and HBASE_RS_INFO_BASE_PORT to appropriate values before running script local-regionservers.sh. e.g. With values 16200 and 16300 for base ports, 99 additional RegionServers can be supported, on a server. The following command starts four additional RegionServers, running on sequential ports starting at 16022/16032 (base ports 16020/16030 plus 2).
```
$ .bin/local-regionservers.sh start 2 3 4 5
```
To stop a RegionServer manually, use the local-regionservers.sh command with the stop parameter and the offset of the server to stop.
```
$ .bin/local-regionservers.sh stop 3
```
Stop HBase.

You can stop HBase the same way as in the quickstart procedure, using the bin/stop-hbase.sh command.

2.4. Advanced - Fully Distributed

In reality, you need a fully-distributed configuration to fully test HBase and to use it in real-world scenarios. In a distributed configuration, the cluster contains multiple nodes, each of which runs one or more HBase daemon. These include primary and backup Master instances, multiple ZooKeeper nodes, and multiple RegionServer nodes.

This advanced quickstart adds two more nodes to your cluster. The architecture will be as follows:

Node Name	Master	ZooKeeper	RegionServer
node-a.example.com	yes	yes	no
node-b.example.com	backup	yes	yes
node-c.example.com	no	yes	yes

This quickstart assumes that each node is a virtual machine and that they are all on the same network. It builds upon the previous quickstart, Pseudo-Distributed Local Install, assuming that the system you configured in that procedure is now node-a. Stop HBase on node-a before continuing.

Be sure that all the nodes have full access to communicate, and that no firewall rules are in place which could prevent them from talking to each other. If you see any errors like no route to host, check your firewall.

Procedure: Configure Passwordless SSH Access

node-a needs to be able to log into node-b and node-c (and to itself) in order to start the daemons. The easiest way to accomplish this is to use the same username on all hosts, and configure password-less SSH login from node-a to each of the others.

On node-a, generate a key pair.

While logged in as the user who will run HBase, generate a SSH key pair, using the following command:
```
$ ssh-keygen -t rsa
```
If the command succeeds, the location of the key pair is printed to standard output. The default name of the public key is id_rsa.pub.
Create the directory that will hold the shared keys on the other nodes.

On node-b and node-c, log in as the HBase user and create a .ssh/ directory in the user’s home directory, if it does not already exist. If it already exists, be aware that it may already contain other keys.
Copy the public key to the other nodes.

Securely copy the public key from node-a to each of the nodes, by using the scp or some other secure means. On each of the other nodes, create a new file called .ssh/authorized_keys if it does not already exist, and append the contents of the id_rsa.pub file to the end of it. Note that you also need to do this for node-a itself.
```
$ cat id_rsa.pub >> ~/.ssh/authorized_keys
```
Test password-less login.

If you performed the procedure correctly, you should not be prompted for a password when you SSH from node-a to either of the other nodes using the same username.
Since node-b will run a backup Master, repeat the procedure above, substituting node-b everywhere you see node-a. Be sure not to overwrite your existing .ssh/authorized_keys files, but concatenate the new key onto the existing file using the >> operator rather than the > operator.

Procedure: Prepare node-a

node-a will run your primary master and ZooKeeper processes, but no RegionServers. Stop the RegionServer from starting on node-a.

Edit conf/regionservers and remove the line which contains localhost. Add lines with the hostnames or IP addresses for node-b and node-c.

Even if you did want to run a RegionServer on node-a, you should refer to it by the hostname the other servers would use to communicate with it. In this case, that would be node-a.example.com. This enables you to distribute the configuration to each node of your cluster any hostname conflicts. Save the file.
Configure HBase to use node-b as a backup master.

Create a new file in conf/ called backup-masters, and add a new line to it with the hostname for node-b. In this demonstration, the hostname is node-b.example.com.
Configure ZooKeeper

In reality, you should carefully consider your ZooKeeper configuration. You can find out more about configuring ZooKeeper in zookeeper section. This configuration will direct HBase to start and manage a ZooKeeper instance on each node of the cluster.

On node-a, edit conf/hbase-site.xml and add the following properties.
```
<property>
  <name>hbase.zookeeper.quorum</name>
  <value>node-a.example.com,node-b.example.com,node-c.example.com</value>
</property>
<property>
  <name>hbase.zookeeper.property.dataDir</name>
  <value>/usr/local/zookeeper</value>
</property>
```
Everywhere in your configuration that you have referred to node-a as localhost, change the reference to point to the hostname that the other nodes will use to refer to node-a. In these examples, the hostname is node-a.example.com.

Procedure: Prepare node-b and node-c

node-b will run a backup master server and a ZooKeeper instance.

Download and unpack HBase.

Download and unpack HBase to node-b, just as you did for the standalone and pseudo-distributed quickstarts.
Copy the configuration files from node-a to node-b.and node-c.

Each node of your cluster needs to have the same configuration information. Copy the contents of the conf/ directory to the conf/ directory on node-b and node-c.

Procedure: Start and Test Your Cluster

Be sure HBase is not running on any node.

If you forgot to stop HBase from previous testing, you will have errors. Check to see whether HBase is running on any of your nodes by using the jps command. Look for the processes HMaster, HRegionServer, and HQuorumPeer. If they exist, kill them.

Start the cluster.

On node-a, issue the start-hbase.sh command. Your output will be similar to that below.

$ bin/start-hbase.sh
node-c.example.com: starting zookeeper, logging to /home/hbuser/hbase-0.98.3-hadoop2/bin/../logs/hbase-hbuser-zookeeper-node-c.example.com.out
node-a.example.com: starting zookeeper, logging to /home/hbuser/hbase-0.98.3-hadoop2/bin/../logs/hbase-hbuser-zookeeper-node-a.example.com.out
node-b.example.com: starting zookeeper, logging to /home/hbuser/hbase-0.98.3-hadoop2/bin/../logs/hbase-hbuser-zookeeper-node-b.example.com.out
starting master, logging to /home/hbuser/hbase-0.98.3-hadoop2/bin/../logs/hbase-hbuser-master-node-a.example.com.out
node-c.example.com: starting regionserver, logging to /home/hbuser/hbase-0.98.3-hadoop2/bin/../logs/hbase-hbuser-regionserver-node-c.example.com.out
node-b.example.com: starting regionserver, logging to /home/hbuser/hbase-0.98.3-hadoop2/bin/../logs/hbase-hbuser-regionserver-node-b.example.com.out
node-b.example.com: starting master, logging to /home/hbuser/hbase-0.98.3-hadoop2/bin/../logs/hbase-hbuser-master-nodeb.example.com.out

ZooKeeper starts first, followed by the master, then the RegionServers, and finally the backup masters.

Verify that the processes are running.

On each node of the cluster, run the jps command and verify that the correct processes are running on each server. You may see additional Java processes running on your servers as well, if they are used for other purposes.

node-a jps Output
```
$ jps
20355 Jps
20071 HQuorumPeer
20137 HMaster
```
node-b jps Output
```
$ jps
15930 HRegionServer
16194 Jps
15838 HQuorumPeer
16010 HMaster
```
node-c jps Output
```
$ jps
13901 Jps
13639 HQuorumPeer
13737 HRegionServer
```
ZooKeeper Process Name

The HQuorumPeer process is a ZooKeeper instance which is controlled and started by HBase. If you use ZooKeeper this way, it is limited to one instance per cluster node and is appropriate for testing only. If ZooKeeper is run outside of HBase, the process is called QuorumPeer. For more about ZooKeeper configuration, including using an external ZooKeeper instance with HBase, see zookeeper section.
Browse to the Web UI.

Web UI Port ChangesWeb UI Port Changes

In HBase newer than 0.98.x, the HTTP ports used by the HBase Web UI changed from 60010 for the Master and 60030 for each RegionServer to 16010 for the Master and 16030 for the RegionServer.

If everything is set up correctly, you should be able to connect to the UI for the Master [http://node-a.example.com:16010/](http://node-a.example.com:16010/) or the secondary master at [http://node-b.example.com:16010/](http://node-b.example.com:16010/) using a web browser. If you can connect via localhost but not from another host, check your firewall rules. You can see the web UI for each of the RegionServers at port 16030 of their IP addresses, or by clicking their links in the web UI for the Master.
Test what happens when nodes or services disappear.

With a three-node cluster you have configured, things will not be very resilient. You can still test the behavior of the primary Master or a RegionServer by killing the associated processes and watching the logs.

2.5. Where to go next

The next chapter, configuration, gives more information about the different HBase run modes, system requirements for running HBase, and critical configuration areas for setting up a distributed HBase cluster.