Squid configuration directive mark_client_packet

Squid configuration directive mark_client_packet

Available in: v7   v6   v5

This directive is not available in the v8 version of Squid.

For older versions than v5 see the linked pages above

Configuration Details:
Option Name: mark_client_packet
Replaces: clientside_mark
Requires: --with-cap and Packet MARK (Linux)
Default Value: none
Suggested Config:
Allows you to apply a Netfilter MARK value to packets being transmitted on the client-side, based on an ACL. mark_client_packet mark-value [!]aclname ... Example where normal_service_net uses the MARK value 0x00 and good_service_net uses 0x20 acl normal_service_net src 10.0.0.0/24 acl good_service_net src 10.0.1.0/24 mark_client_packet 0x00 normal_service_net mark_client_packet 0x20 good_service_net Note: This feature is incompatible with qos_flows. Any mark values set here will be overwritten by mark values in qos_flows. This clause only supports fast acl types. See https://wiki.squid-cache.org/SquidFaq/SquidAcl for details.

Back

Introduction

Documentation

Support

Miscellaneous